Showing posts with label Sixties. Show all posts
Showing posts with label Sixties. Show all posts

Monday, December 1, 2025

Tiny but Mighty: the Abarth 500-595-695

Younger people today, familiar only with the specifications of contemporary/recent cars, may well wonder if someone is joking if they take a glance at this set of numbers which define a newly launched compact saloon: Engine capacity: 479 cc; Engine power output: 13 bhp; Kerb weight: 470 Kg; Length: 2970 mm; Width: 1320 mm; 0-60 mph: 1 minute or thereabouts; Top speed: 53 mph.  Now that launch was way back in 1957, so that explains a lot, but even that long ago the majority of potential buyers did not find themselves attracted by those performance numbers.  The situation did however provide Carlo Abarth with an exciting opportunity and he seized it speedily and with enthusiasm.  As a result, the Abarth version of the Fiat 500 Nuova was ready for presentation within a few short months.  With the two cylinder engine’s compression ratio raised, a Weber 26 IMB carburettor fitted and a sports exhaust, the Fiat Abarth 500 had 21.5 bhp to play with.  But both Fiat and Abarth’s initial vision of a 500 cc car struggled to achieve the sales volumes that had been anticipated.  Fiat tried two countermeasures – 1) Cutting the price of the basic model and introducing an improved specification, ‘Normale,’ and, 2) Introducing a ‘Sport’ model in mid-’58 which featured a 499 cc engine with similar performance to the Abarth’s, and some cosmetic enhancements including a metal roof.  Abarth went a touch more radical, introducing a new cylinder head with hemispherical combustion chambers and further upping the compression ratio.  Together with attention to gas flow optimisation, 26 bhp was extracted from the little two cylinder.  All good stuff, but the really clever move was to run such upgraded 500s at Monza in February ’58.  They achieved noteworthy speed/distance records which attracted a good deal of press attention.  But, even more significantly, note was taken by Fiat’s top management, leading to a new level of talks with Abarth.  And those talks culminated in the ‘win bonus’ agreement which became so important to Abarth throughout the Sixties – see here. 

Left: Presentation of Fiat 500 Nuova, Turin, July ’57  Courtesy FCA Heritage; Centre: ’57 Fiat 500 Nuova  Courtesy Cymon Taylor/RM Auctions; Right: Fiat Abarth 500, Monza record, February ’58  Courtesy Stellantis


With the Fiat version able do more than just permit its driver to chug around in discomfort, its commerciality was established and customer approval progressively improved.  Through the Sixties it was regularly improved and established itself as a respected model in the Fiat range, even if the 600 was seen as more successful.  It remained in production until ’75, by when 3.7 million had been manufactured.  In the early years of the Sixties, with a model designation, ‘D,’ the car’s doors remained rear hinged.
 
For Abarth, the ‘difficult’ years extended to ’63, when the 595 1st Series was launched that January.  This bigger engine capacity version, along with the 695 which emerged the following year, found much more sales success, largely founded on how well both variants performed in motorsport.  The Fiat 500 engine had been based on a separate cylinders format, but, along with the increase of capacity to 594 cc, Abarth decided to reconfigure it, with the two cast iron barrels conjoined.  Thus there was provision for further enlargement and with potential additional power outputs for better accommodation of higher operating temperatures.  A reprofiled camshaft and upgraded valve springs figured, along with domed pistons, (facilitating a 9.5:1 compression ratio), while internal polishing for enhanced gas flow and a change of carburettor – to the Solex C28 PBJ – all contributed towards a 27 bhp output.  With weight still around 470 Kg, the 595 could do 0-60mph in 28.3 seconds – though not exactly electrifying, that’s half the time it took the original Fiat 500 to do that.  For the period, the 75 mph top speed was considered more than acceptable for such a diminutive car.  As can be seen in the photograph below, being based on the Fiat 500 D, this 595 still featured the ‘suicide’ door rear hinges.

’63 595 #575584  Courtesy Bonhams Cars

One year on, Abarth’s ongoing quest for incremental performance resulted in the announcement of the 695.  This time the capacity increase was to 689 cc, enabling the delivery of 30 bhp.  At the same time, just in case any prospective buyers might think a mere 3 bhp not much of an increase over the 1st Series 595, further variants, the 595 SS and 695 SS, were presented.  With a higher compression ratio and a bigger Solex carburettor, the 695 SS deployed 38 bhp.  Able to turn 87 mph flat out, it was worthy of its Super Sport designation – confirmed by an ‘esse-esse’ script badge on the engine deck lid.  A ‘64-made 695 SS is seen below, left, with points to note: Lesmo aluminium wheels; engine deck lid badge is ‘SS’ version; Campione del Mondo badge on the rear quarter panel; rear hinged doors.  Below, right, is a ’64 595 SS, which runs on CMR/Borrani steel wheels.  When auctioned in 2023, the lot description stated that the car has been ‘upgraded’ to 695 SS specification.

Left: ’64 695 SS #0866463  Courtesy Peter Bovyn Fotografie; Right ’64/65 595 SS #785002  Courtesy Iconic Auctioneers


During ’65, Fiat introduced a revised 500, known as the ‘F’ model which was equipped with front hinged doors.  Accordingly, from June of that year, there were 2nd Series versions of the 595, 695 and 695 SS.  The engine power output of all three models was increased by 2 bhp.  The 595 SS 2nd Series was rated at 32 bhp.

’66 595 2nd Series

’65 595 2nd Series, #0862866  Courtesy RM Sotheby’s

Below is a ’67 595 SS, #1399557, with the engine bay and front trunk interiors shown.

’67 595 SS #1399557  Courtesy RM Sotheby’s

In the mid-sixties, Abarth felt a particular challenge to its 4 cylinder 850/1000 Berlina models’ competitiveness in Touring Car racing.  Consideration was given to converting the 200 series engine’s cylinder head to a twin cam format to facilitate further increased power outputs.  Eventually, however, it was decided to meet the objective by redesigning the single cam head’s combustion chambers and valve gear layout.  The result was the ‘Radiale’ head which enabled improved gas flow and combustion thanks to the combustion chamber form and the orientation of the valves.  Each combustion chamber comprised two overlapping hemispheres, the slightly larger encapsulating the inlet valve, the smaller housing the exhaust valve.  As additional measures of unconventionality, each pair of valves was inclined towards one another and were aligned transversely in relation to the cylinder head.  A similar project was approved for the two cylinder unit.  According to Sotheby’s, five 695s were built with Radiale-headed engines.  One of these was offered for sale in 2024 and is shown below.  The auction catalogue refers to this car as ’65-built, something I have not been able to verify and may be a doubtful attribution given that other sources do not date the two cylinder Radiale project prior to ’68, though Alfred Cosentino’s Abarth Guide includes a picture of a Radiale-head engine with a ’67 date attribution!

695 with Radiale head engine  Courtesy RM Sotheby’s
 
The two cylinder version of the Radiale head was a successful project for Abarth’s engines designer Luciano Fochi in terms of meeting the company’s power increase objective.  Its completion was not, however, as swift as Carlo would have desired.  Some of this no doubt stemmed from the difficulty in balancing the new basic elements – valve gear, manifold, twin choke 45 mm Weber carburettor and uprated cooling system – and this demanded prolonged and intensive testing/experimentation.  In consequence, it was not FIA homologated until mid-’71, meaning that the benefits of its availability to the racing programme could not be gained until after Abarth had ceased to exist as a marque in its own right. 

In September ’66 the production version of the 695 SS Berlina Corsa 1st Series made its debut.  The model is often tagged as 695 SS Assetto Corsa, (race trim), but the factory itself did not use the term, though there is sometimes reference to it being a ‘Competizione’ version.  It certainly was a car worthy of track use, with 42 bhp being delivered by the 689 cc engine.  A slightly more powerful 2nd Series appeared in January ’68. 

Culmination of the development programme came in January ‘70 with the 695 SS Berlina Corsa 3rd Series, a 45 bhp, 90 mph rocket.  Performance had this time been improved by incorporating a separate cylinder head intake channel for each cylinder   The car was priced at Lit 900,000 at launch.  The example seen below was sold by Bonhams in 2023 for €42,550.  The auction lot description states that 100 of these were made and that around half that number have survived.  It also notes that the car has a modified-in-period engine rated at 48 bhp.

’70 695 SS Berlina Corsa 3rd Series #2497485  Courtesy Bonhams Cars

On the car in the factory PR image below, the wheelarches (polyester) and lower side areas were finished, distinctively, in red:

Courtesy Registro Fiat Italiano

The 695 SS Berlina Corsa 3rd Series Tipo 206-A/D engine was fed by a Solex 34 PBIC carburettor and had a 10.5:1 compression ratio.  The car’s weight, at 480 Kg, was only very slightly heavier than the first version of the 695.

The 500, 595 and 695 scored many victories, attracting win bonus payments from Fiat in the years ’60-’71 – a total of 528.  Things began to really pick up in ’64 after the advent of the 595 and 695 models.  An early landmark was Franco Patria’s taking of the Jolly Club Trophy (600 cc class) at Monza in March ’64.  An important win came at the end of that season when a 595 headed the 600 cc class at the Monza Coppa F.I.S.A.  ’65 saw Leo Durst become Italian Touring Car Champion in the 600 cc class driving a 695.  The same feat was achieved in ’66, this time with Raffaele Pinto at the wheel, while Maurizio Zanetti took the 700 cc class in a 695.  Pinto was also victorious at Monza in the Touring class of the F.I.S.A. cup at Monza.  The ’67 Italian Touring Car Champions were again Abarth drivers, Marco Magri (595) in the 600 cc class, and Giovanni Brancadori (695) in the 700 cc class.

The 600 cc class of the Italian Touring Car Championship of ’68 was once again won by an Abarth 595 driver, this time Piergiorgio Poggi.  Expectations for the season were boosted by internal talk about the possibility of a Radiale head for the two cylinder engine, but, as mentioned above, this enhancement would not be homologated until ’71.  In March ’69, Abarth apparently demonstrated ongoing superiority at Vallelunga where 695s were 1-2-3 in the 700 cc class and Raimondo De Sanctis was the 600 cc class winner.  At the end of the season Abarth saw victory in the Touring Trophy once more – Piergiogio Poggi in the 600 cc class and Liberatore Cestra in the 700 cc class. 

The ’70 season opened with Abarth 595 and 695 class wins in the European Touring Car Championship round at Monza, so ‘business as usual.’  That was further confirmed by good performances on the hillclimb courses, where both 595s and 695s remained capable of class victory.  Renato Mazzeschi and Santo Famaso finished the season as Italian Touring Car Champions in their 595 and 695, respectively.  However, as an indication of what was to happen the following year, Abarth set up a new race department away from Corso Marche and under the care of Vincenzo Osella. 

’71, Abarth’s swansong year saw customary hillclimbing success with both 595s and 695s recording wins.  But as the season progressed past the midpoint, the in-house Abarth race operation was wound down and cars/parts/equipment was progressively relocated to the Osella workshop.  In its final guise as the Abarth factory team and as reconstituted at Osella, concentration was on the SE-designation sports racing cars, with a drop-off of focus on the 595/695/850 TC/1000 TC Touring cars.

A few years back I found myself attracted to the current ‘Abarth’ 595 and 695 models.  By today’s standards they are not unnecessarily big, have distinctive styling/a funky interior and a choice of engines offering good performance.  But a test drive soon deterred me, despite the aesthetically pleasing interior, some not over-suppressed exhaust noises and good nimbleness at slower speeds.  The original 595/695 models were designed on a customer centric basis and with a sports enthusiast/race driver in mind.  For such a person now the contemporary versions do not fit the bill.  My biggest concern was about how the seating position/ride height feels – I can best describe my unease in these cars as I sense that I’m sitting on the car rather than within it as you do in those cars where the machine feels as though it’s a seamless extension of your own body.  I have tried another this year, this time with the Sabelt optional seats, and the non-integrated sensation remains.  Performance of the Competizione is good – 0-60 mph in 6.5 seconds, but how much better could it be if the car’s kerb weight was less than its 1170 Kg – the sixties versions weighed in at less than half that!  And the engine that generates the 180 bhp involved is a three cylinder 1.4 turbocharged unit driving through a 5 speed (surely 6 ratios would be expected in a car of this type) gearbox  - a configuration that you know will not be delivering much in the way of really sweet drivability, linear power flow and pleasing noises, (though the Monza exhaust option would be worth having).  So I say that here’s another example of ‘progress’ that takes us backward and that less is more!




Sunday, July 21, 2024

Double Bubble? Better double check!

When my enthusiasm for Abarth in its pre-Fiat guise began, much of it stemmed from a liking for the 750GT models – the association with Zagato playing a big part, as I had long revered the work of the Milanese carrozzeria.  Zagato versions had been amongst my favourites when I worked for Alfa Romeo from the late 70s through to the early 90s, and I had greatly enjoyed the opportunity to visit the Via Arese, Terrazzano, factory during the 80s.

However, I soon found myself heavily focused on Abarth’s wonderful Sixties models and their achievements in circuit racing and hill-climbing.  The 750s remained something I loved to see and admire, but I was accumulating not much in the way of specific knowledge about the production run and the variant types that came and went.  More recently, my OCD kicked in and I realised that I needed to tidy up – in my own mind at least - the mass of information fragmented in many resources.  As I started out on the task, I envisaged as an outcome being able to create a document encapsulating a succinct outline of the model’s production history, distinct sub-models, modifications/updates, with a particular focus on external bodywork features, enabling anyone interested to make an assessment of an individual car’s age/specific type/originality – no real ‘science,’ (or forensics), but something more orderly and accessible than what we already have in published form.

After assembling, analysing and documenting a considerable amount of data, I tentatively shared the results, looking for an indication that either: 1) There was something developing which would be worthwhile, or, 2) That the information is not solid or ‘fresh enough’ to make it likely to result in an outcome of value.  Now, I am just an automotively-romantic old English bloke trying to make sense of information that was mostly inaccurately recorded at the time and is now ‘historic,’ making it even more difficult to check and verify.  So I was especially disappointed to find myself being told that most of the information sources to which I refer are unreliable and/or known to provide data that’s erroneous, inaccurate or fallacious.

As an immediate reaction, I stopped working on the project.  But I have now reconsidered, and think it worth taking it to a logical conclusion.  I will however be very careful to strongly emphasise within an introduction that all such information is liable to include errors and misinterpretations – it will be offered as a ‘guideline,’ and not as any kind of definitive document.  As such, I hope Abarth enthusiasts will find it to be of interest.  I would expect to be posting it next month.



Tuesday, August 8, 2023

Ollon Villars in the Sixties

Ollon is a small Swiss town with a population of about 8,000. Situated near and to the west of the River Rhone,  it is a little to the south of the western end of Lake Geneva, about 400 metres above sea level.  Heading west, mountainous topography is encountered, including the notable peak of Les Diablerets.  In this direction, after some 5 miles and at an elevation of 1,260 metres, Villars sur Ollon is reached, a village inhabited by around 2,000 people.  The connecting road, with several hairpin turns, was first used as a hill-climb course in 1951.  Every other year, (with some exceptions), for the following two decades it served as one of the most popular hill-climb venues.  By 1958 the event’s status was good enough to allow it to feature as a round of the European Mountain Championship, regulated and governed by the FIA.


At the start of the decade pure racing cars were dominant at the head of the results table.  In 1960 this can be seen in the list of the ten fastest times:

Barth’s fastest time was 4 minutes, 52.7 seconds – he was the only driver to get below 5 minutes – next up, Heini Walter, was 11.6 seconds ‘slower.’  The RSK-based 718/2, launched in Spring 1959, had benefited during the 1960 season from subsequent development informed by feedback from Stirling Moss.  Porsche had successfully interested Moss in driving the 718 in Formula 2 in 1960 by loaning a car to the Rob Walker team.  It was hoped that this would lead to a works drive in the new Formula 1 in 1961.

The Heini Walter RS60 had run as a works car at Le Mans, following which it had its modified rear bodywork, (purpose-made to enhance top speed capability on the Mulsanne straight), removed, and the engine replaced with a larger (1,700 cc) unit.  It was then loaned to Walter for hill-climb entries under his own name.  He was happy enough with this car to retain it for ’61 and was rewarded by a series of good results which secured for him that year’s Championship. 

Brabham competed at Ollon Villars as the reigning Formula 1 World Champion, his Cooper T51-Climax clearly demonstrating that everyone would have to make the move from front- to rear-engined cars.  For Ollon Villars he was equipped with the improved T53 chassis powered by a smaller 1,475 cc FPF Coventry Climax engine.  Using the T53 with the 2,497 cc version of the engine, Brabham would finish 1960 as Formula 1 Champion for a second successive season.
 
Below, left: Edgar Barth in the winning Formula 2 Porsche. (Courtesy Arthur Fenzlau).  Right: Jack Brabham in the 3rd placed Cooper T53.


While there had been 129 competitors recording completed/timed runs in 1960, the number was much reduced in 1962 – down to just 56, (through it’s possible that there was a failure to record/preserve lower order competitors’ times).  Porsches were again prolific in the top ten:


An important development for Porsche in its quest to maintain the 718 series cars’ competitiveness was the utilisation of a 210 bhp version of the Formula 1 eight cylinder engine.  In this form the cars were designated as 718/8 W-RS Spyder. 

The event was further distinguished in 1962 by Jim Clark’s participation.  Already considered an outstanding talent and potential future World Champion, and with the ill feelings from the previous season’s tragic Monza accident fading, Clark arrived at Ollon Villars as the subject of much expectation.  Some thought that he might be fastest in the smaller capacity Racing class.  Unfortunately however, the Lotus team was unable to put a really suitable and competitive car at his disposal.  All that could be drummed up was the loan of a Scuderia Filipinetti Lotus 21.  Its dynamic attributes proved to be beyond even Clark’s prodigious talents, leaving documented reports of his performance limited to mention of an ‘off’ in practice and the absence of any record of the best time achieved. 

The photographs seen below are credited to Kuno Zimmermann.  They were found on the website, smallcar.ch, a wonderful resource which I would greatly recommend.  Left to right: Heini Walter, Porsche 718/8W-RS Spyder; near the start, #185 Walter, #184 Scarfiotti, (#186 unidentified); Jim Clark #31.


1963 saw some familiar names at the top of the results table.  Porsche supplied three of the top ten runners, but competition was more in-depth and diverse than in the first two events of the decade.  The best-placed Porsche was 2nd, 7 seconds behind the winner:

Especially notable cars were Bonnier’s Ferguson, Brabham’s Brabham and Muller’s Porsche ‘missing link.’  The Ferguson was a very distinctive machine, it being not only 4 wheel drive, but also the last car built for Formula 1 with a front-engined powertrain.  In addition to this victory in Switzerland, the 2.5 litre car was further successful in capturing the 1964 British Hillclimb Championship.  The Brabham BT4 was introduced in 1962, primarily to be raced in the Tasman series ‘down under.’  Its agility, however, made it very suitable for hill-climbing and the third (of three) chassis constructed was sold to Charles Vögele specifically for European hill-climbing campaigns – and in 1963 he was dominant in the car in the Swiss national championship. 

As I outlined in The Dream Hybrid - Conceived in the Fifties!, the ‘Dreikantschaber’ was created to bridge the gap between the Porsche GTL and the 904: Porsche had readily appreciated since the latter part of 1962 that it would need something more radical than the GTL if it was to retain its competitiveness in the GT racing classes – threatened as that would be by new/improved rival models such as the Alfa Romeo TZ and the Abarth Simca 2000.  Thus, while the GTL would continue through 1963, the 1,966 engine and better brakes began also to be utilised in a new bodied, 718, RS61-based, ‘GS-GT.’  The two examples of this made – also known as ‘Dreikantantschaber’/DKS* – ran in parallel with the GTLs, from the Targa Florio onwards.  This model would serve as a steppingstone to the ultimate requirement, a mid-engine GT, which was realised in November 1963 with the initial presentation of Butzi Porsche’s rapidly-developed 904/Carrera GTS.  *This is the German name for a sharp, triangular-pointed scraping tool – the visual reference being to the ‘sharp’ form of the car’s nose/front end. 

Both images below courtesy of Automobile Sport.  Left: Hans Herrmann claiming 3rd in the Abarth Spider Sport; right: Jo Bonnier with the Ferguson P99.


The 1965 event was the 17th (of 20) round of the World Sportscar Championship, which that season was two-pronged: 1) International Championship for GT Manufacturers, and, 2) International Trophy for GT Prototypes.  The former, in its Division 1 class, was dominated and won by Abarth, the marque’s fourth consecutive World Championship triumph.  Ferrari was clearly in the ascendancy in the Prototypes competition and would finish the season with almost double the points scored by runner-up, Porsche.  Within the European Mountain Championship, Ludovico Scarfiotti’s scoring had been underlining Ferrari’s strength, with his Sant Ambroeus-entered, (works-backed), Dino 206 SP being the winning car at Ollon Villars, as it had been at Trento Bondone, Cesana-Sestrieres and Fribourg. 

Scarfiotti's car was an open-top version of the Dino 166 P with a bigger (2.0 V6) engine, giving 218 bhp.  For his part, Scarfiotti was an extremely accomplished and versatile driver, having won the European Hillclimb Championship in ’62, Le Mans the following year, and he was an Italian Grand Prix winner.  His main opposition in ’65 came from the works Porsche 904/8s of Gerhard Mitter and Herbert Muller and Abarth 2000 OT of Hans Herrmann.  Also able to challenge were, for example, 904 GTS Porsches in the hands of drivers such as Herbert Muller, Rolf Stommelen and Michel Weber, while Herbert Demetz could also turn rapid ascents in the 2.0 Abarth.  The ten fastest in ’65 were:


The model designation of Mitter’s car (chassis #906-010) was enigmatic and quite confusing.  Firstly, though referred to as 904s, the Bergspyders used for sportscar racing and hill-climbing in ’65 had chassis numbers configured 906-0xx, all with an eight cylinder engine.  To compound potential misunderstandings, #010 was used for a chassis which appeared at the Rossfeld hill-climb meeting in June but was then promptly junked and the number re-used for the chassis Mitter debuted at Ollon Villars.  This was itself distinctive as it was an even lighter Bergspyder – at 488 kg – thanks to a new tubular spaceframe construction, one of the first outcomes of Ferdinand Piech’s involvement in the works racing organisation.  Thus, this car was virtually a 906, a model type which would long remain emblematic of Piech’s influence and achievements.  Crucially, the 906 allowed a huge scope for development, in contrast to the limitations of the 904, being more of a road car modified for the track. 

Alongside Mitter’s 904/8 as a Porsche System Engineering Ltd. (i.e. works) entry, was an Elva Mk.7, driven by Anton Fischhaber.  This was powered by the same Type 771 1,991 cc flat 8 engine used in #906-010.  The Elva chassis, as proven in other applications, was effective and enabled Fischhaber to finish 16th, his best time being 4 min. 36.3 sec, 24 seconds greater than Mitter’s.  For further comparison, the similar, but BMW M10-engined Mk.8 Elva of Sidney Charpilloz was 5.4 seconds slower. 

With his World Championship successes of the era, Carlo Abarth was keen to add the European Mountain title to the brand’s the honours list.  His problem however was the lack of a multi-cylinder engine of the level of capability at the disposal of  the Porsche and Ferrari marques.  Of the several coupe and barchetta type cars being built at Corso Marche mid-decade, the most suitable for the hills were the OT (Omologata Turismo) Spiders.  There was however an underlying compromise in so much as the Fiat 850-based chassis was relatively heavy.  A positive feature however was the first use by Abarth of glass fibre for fabrication of the whole body structure.  Designated as Tipo 139, the car, as driven at Ollon Villars by Demetz, utilised the 1,946 cc version of the Abarth 4 cylinder Bialbero, good for 209 bhp.  In simple terms the Abarth’s main disadvantage against the Porsche and the Ferrari was its weight – quoted as 710 kg.  Thus, it was bound to struggle with performance, given that its 209 bhp compared with 218 for the Ferrari and at least 250 from the Porsche unit. 
Images below, left: Peter Ettmuller’s Shelby Cobra, finished 19th; centre: winner, Scarfiotti’s Ferrari 206P. (Copyright GPL – Geoff Goddard); right: Ferrari 275 of Giampiero Biscaldi. (Courtesy Alamy).


The meeting in 1967 – also known as the Swiss Mountain Grand Prix - was the last which enjoyed the status of being a round of the International Manufacturers Championship, (also known previously as the World Sportscar Championship, and, subsequently as the International Championship for Makes.)  The change of status was no reflection on the venue – hill-climbing underwent a diminution of popularity through the sixties, and events became less well supported.  While there were four climbs in the 1965 Championship calendar, Ollon Villars was the only one in ‘67, and the category did not feature anywhere in subsequent years.  The European Hillclimb Championship would however continue, (through to the current day), and in ‘67 Ollon Villars was the penultimate of eight rounds.  The competitors arrived at the Vaud canton in late August, with Porsche assured of the Championship, its cars, running in the premier, Sportscar (Prototype), class, having been victorious at all six of the previous rounds.
 
The two Weissach works drivers were Gerhard Mitter and Rolf Stommelen.  Mitter was the reigning European champion having outscored the opposition in 1966 at the wheel of a Porsche 910 coupe.  The Porsche System Engineering team was keen to repeat that success and was conscious that an increased level of competition could be expected in ’67, especially in the shape of the Abarth 2000 SP, Ferrari 412P, Lola-BMW T110 and Alfa 33.  Thus it was decided to revert to the ultra-lightweight Bergspyder format as had been successful in ’65 (904/8).  This decision was facilitated by a regulations change which removed the minimum weight limit and reintroduced governance by the very liberal Group 7 technical stipulations.  Both using the resulting 910/8 Bergspyder, Mitter and Stommelen had won all the previous rounds, at Montseny/Trento-Bondone/Freiburg-Schauninsland and at Rossfeld/Mont Ventoux/Cesana-Sestriere, respectively.
 
Key specification features of the Spyders included the very low weight of just 499 kg at the beginning of the season.  And this was further reduced as development continued during the season, primarily on the car allocated to Mitter, the frame of which was rebuilt in aluminium, a measure that gave a one-third weight saving.  A variety of other modifications included a tiny fuel tank – 15 litres capacity – and some exotic materials: magnesium wheel rims, beryllium for the brake discs and titanium for the brake calipers and stub axles.  Bodywork was in very thin gauge glass-fibre with notably short side panels – prompting a ‘Mini-Skirt Spyder’ nickname.  By the time of the Ollon Villars event, the kerb weight was down to 418 kg.  A side benefit of the enhanced light weight was the feasibility of using ballast over the front axle in order to ‘calm’ the handling characteristics, contributing significantly to the car’s drivability.  As for the other crucial performance component, the type 771 engine delivered 260 bhp.  All this was good enough to allow Mitter to take first place with a time of 3 min. 55 sec, (for comparison, the eventual record time, achieved by Francois Cevert in ’71, being 3.47).  The top ten in ’67 were:


The Ollon Villars course was not generally thought to be especially hazardous, though following his outright record-establishing run in ’71, Francois Cevert is quoted as saying: ‘Never again will I indulge in such a dangerous adventure. I find the climb quite frightening, brushing guardrails at high speed and clipping trees. Circuit racing is much less demanding.’  Cevert’s opinion is validated by the fact that two drivers died at the ’67 event – Axel Perrenoud, driving a Shelby Cobra on the Friday, and Michel Pillet the following day at the wheel of a Ecurie La Meute Triumph Spitfire.

Images below, left: Peter Schetty’s Abarth 2000 SP, 4th fastest. (Courtesy Equipe Bergamote); centre: Sepp Greger’s Porsche 906. (Courtesy Zwischengas CZ); Porsche 910 of Rolf Stommelen. (Courtesy Karl Ludvisgen).


On 31st August 1969 the 7th round of the European Championship was again held at Ollon Villars.  Where ’67 had been a season of Porsche and Mitter/Stommelen domination, ’69 had proved to be a walkover for Ferrari and Peter Schetty.  He had mastered the 212E Group 7 barchetta and was very fast on all the ‘mountain’ courses.  In winning once again at Ollon Villars – making it a championship series clean sweep, (though he was not entered for the final round at Gaisberg) – Schetty set a fastest time of 3 min.47 sec, 8 seconds better than Mitter had managed in ’67 and a fraction slower than Cevert’s all time record.  The 212E was a development of the Dino 206S with various weight-saving modifications similar to those practised by Porsche on the Bergspyders.  But, as implemented at Maranello, such measures did not result in an equally lightweight car, the 212E weighing in at around 515 kg.   The Ferrari however benefited from a very high performance engine (Tipo 232) – a 2,000 cc flat 12 rated at over 300 bhp.


Images below; left: Schetty, Ferrari 212E, 1st place. (Courtesy SupercarNostalgia); centre: Alfa Romeo 33/2 as raced by Michel Weber to 5th place, (this photograph not taken at Ollon Villars); right: Arturo Merzario in the Abarth SE010.


The FIA-governed European Hillclimb Championship has continued through to the current day.  Since the last Ollon Villars-hosted round in 1971, various revival events have been held there, the first being in 1998 when 12,000 spectators attended the International Retrospective Hill-Climb.