Showing posts with label Busso. Show all posts
Showing posts with label Busso. Show all posts

Wednesday, April 19, 2023

Alfa 33 - In the Beginning

Quitting when you’re ahead has always been a difficult decision to take.  Jackie Stewart managed it in 1973, but how many other drivers have hung on too long, meandering down grid order and shedding much of the lustre they’d worked so hard to establish in the early days of their career?  Alfa Romeo did bow out at the top, in 1951, having won the F1 World Championship that, and the preceding, season.  But 10 years later, having stepped up its production capacity, the company was in need of the marketing momentum provided by successful association with top-flight motor sport.  At the same time, a group of people were quitting another famous Italian car manufacturing house - Società Esercizio Fabbriche Automobili e Corse . . . i.e. Ferrari.  Several key engineers were fired by Enzo Ferrari for insubordination in a dispute over management authority.  Two of these men, Carlo Chiti and Giotto Bizzarrini, would be of the utmost importance in the process by which Alfa Romeo would achieve its sporting ambitions.

Fig.1. Ferrari, Chiti and Bizzarrini.
Courtesy Rosso Automobilii

Chiti and Bizzarrini were at work in 1962 at the newly formed, Count Giovanni Volpi-funded, Automobili Turismo e Sport, (ATS), determined to show Ferrari what he’d lost in dismissing them.  Thus, their initial focus was on the creation of a Formula One car to rival the Championship-winning F156 ‘Dino,’ powered by a 1,494 cc V8 engine intended to outdo the 120° V6 Chiti himself had designed for the Dino.  The car, Tipo 100, was raced at just five Championship events in the 1963 season and was notably unsuccessful.  However, the engine provided the basis for a larger capacity version which ATS required in order to build the road car that would be needed for the generation of profit and thus funding for future racing activities.  In a bold move, with the aim of maximising the appeal of the new car, that engine, with a capacity of 2,468 cc, was located in the central position, only the second production road car featuring this configuration; (the first being the Rene Bonnet Djet which first appeared in mid-1962).  In its original iteration, the ATS engine produced 220 bhp, and with the car weighing around 800 kgs, performance was good – 0-60 mph in 5 secs and a top speed of 150 mph.  However, the ATS 2500 GT, despite its sporting attributes – and there was an even quicker GTS version – and attractive Scaglione styling, was not a sales success.  Between its launch in April 1963 and the company’s financial failure some 20 months later, only 12 cars had been manufactured.

Fig.2. Left to right: ATS F1 engine (Phil Hill driving). Courtesy Pete Lyons; ATS 100 (Baghetti at Zandvoort, 1963). Courtesy F1-photo.com; ATS 2500GT engine; ATS 2500GT. Both courtesy Autoneuroticfixation-com

Meanwhile, at Alfa Romeo, Orazio Satta Puliga and Giuseppe Busso had been charged with responsibility to determine the best form of elite motor sport in which the company should now participate.  Their view was that sports prototype racing was the most appropriate, offering a direct emotional and technical link to the type of road cars for which the Marque was most renowned.  While this planning was developing, the entire organisation was under considerable disruption and stress, since the completion of the new factory at Arese and the transfer of production from Portello had been in progress since 1960.  CEO Giuseppe Luraghi took the view that this situation would make it difficult for an internal sporting department to be fully effective – what was needed at that point was something similar to what Scuderia Ferrari had offered so successfully pre-war.  Such a thing was found – in Udine, far to the east in Northern Italy, where Chiti together with Ludovico Chizzola had founded Autodelta in the wake of the collapse of ATS.  Naturally, Chiti was keen to impress Luraghi and thus took a strident line when making an initial review of Satta and Busso’s proposals and tentative prototype work.  He suggested he could take a different approach and achieve rapid progress.  Consequently, Progetto 105.33 really got underway as Chiti’s vision of a Group 6 open sportscar with a  two litre engine.  Where Satta/Busso’s early experiments had utilised the twin cam 1600 cc inline four cylinder as deployed in the TZ1, Chiti favoured a V8, and in his head, and on-paper, he had a design ‘ready to go,’ from his recent work at ATS.

Fig.3. Chiti’s V8 for the 33. Courtesy Supercar Nostalgia

With the enhanced resources now available to him, Chiti was able to improve on his ATS-branded design.  In its launch form it was a four cam with induction by four Weber 46 IDF2 carburettors and set up for – though not initially equipped with – twin spark ignition.  Power output from the 1,995 cc capacity in early 1967 was around 250 bhp.  The chassis was a carry-over from the Scarabo concept car.  Fabricated by the specialist firm, Aereaonautica Sicula, it was composed of three main elements rivetted together – a pair of stout, tubular aluminium longitudinal members/centre crossmember, with a magnesium front crossmember and transverse rear suspension carrier.  Drawn in-house at Autodelta, the body was fabricated in fibreglass and was distinctive in featuring a domed windscreen and large air intake tube above the engine deck, giving rise to the nickname for the car – ‘periscopica.’  Its weight was 580 kgs.

Fig.4. 33/2 chassis frame. Courtesy Vladimir Pajevic Archives

Testing was entrusted to Teodoro Zeccoli, initial mileage being accrued at the Alfa Romeo Balocco test track, midway between Milan and Turin.  At a further session, with chassis #002, at the Monza circuit, Zeccoli had the misfortune to crash heavily in the cold, grip-limited conditions of a January morning.  Owing to fire on top of the impact damage, this car was written off.  Nevertheless, the design – designated model 33/2 – had shown itself to be effective and capable of competitive lap times.  So it was presented to the Press on 6th March at Monza.  Luraghi made a point of attending, signalling the importance of the car in its role of re-establishing Alfa Romeo’s commitment to motor sport at World Championship level.

Fig.5. 33/2 as presented at Balocco, March 1967.
Courtesy Centro Documentazione Alfa Romeo, Arese

Immediately after the Press launch, chassis #001 was transported to Belgium and made the 33’s maiden race appearance at a hillclimb south-east of Liege.  The event was held at the Course de Côte de Fléron.  Zeccoli achieved the fastest time overall, outperforming a 5.0 McLaren M3A and 2.7 Brabham BT23B, 2nd and 3rd respectively.

Fig.6. #001/Zeccoli at Fléron, March 1967. Courtesy Centro Documentazione Alfa Romeo, Arese

For the 33’s first circuit race, the 12 Hours of Sebring, (The Alitalia Airlines Trophy), 1st April 1967, Autodelta entered 3 cars, although one – for Giacomo Russo and Enrico Pinto - did not appear.  At this point, Lucas fuel injection was under evaluation and said to be giving 270 bhp – around 20 bhp more than available with Webers.  In practice, the 33 of Andrea de Adamich and Zeccoli (#004) qualified 9th, and fastest, in the 2 litre class.  This performance was especially significant – and encouraging – since it bettered that of the two factory Porsche 910s, (a model which had already benefitted from over six months more development than the 33), and three Ferrari Dino 206 S entries.  Less successful was the second chassis, (#005), driven by Nanni Galli and Roberto Bussinello, down in 21st.  In the race it was an early retirement – after just 36 laps – as a result of ignition system failure.  The de Adamich/Zeccoli car ran to one third distance before dropping out with suspension trouble.

Fig.7. #004 (de Adamich/Zecolli) at Sebring, April 1967.
Courtesy Primotipo Files

Soon after, three 33s were shipped to France for the Le Mans test weekend.  One of the cars featured the first Tipo 33 variant body – a long tail, and on which the ‘periscope’ was deleted, with speed and stability on the Mulsanne Straight being the objective.  The configuration proved effective, with de Adamich able to wring the 10th fastest lap (and make it the quickest 2.0 car) from it.  The other two cars were as run at Sebring, with Bussinello in 12th – 2nd in the 2.0 class – and Zeccoli, in a brand new chassis, 25th overall.  So, once again, despite their still relative newness, the 33s were proving fully competitive.  Clearly, the focus now required was on improving reliability, especially with the 24 Hours race in mind.

Fig.8. Longtail 33/2 in which de Adamich recorded 10th fastest time at Le Mans test.
Courtesy Patrick Dasse/Martin Übelher

Four cars were entered for the Targa Florio run on 14th May.  There were some minor body detail variances – mainly involving openings/ducts for cooling air intake – but no distinct alternative forms as had been seen at the Le Mans test with the longtail.  In practice, in car #170, de Adamich, (partnering with Jean Rolland), recorded the 6th fastest time.  This seemed quite promising since, over the 45 miles lap, Nino Vaccarella’s (Ferrari 330) pole lap was only 1 minute, 34 seconds quicker, despite having twice the engine capacity.  However, the Autodelta team was soon feeling considerable concern for the cars’ race-length reliability because gear selection was problematic and, most ominously, three front suspension breakages were experienced. 

In the race, de Adamich carried through his practice pace, running 2nd overall until yet another suspension failure occurred, putting the car out with 7 laps (of 10) completed.  Car #190 of Jo Bonnier and Giancarlo Baghetti succumbed to the same fate, but much earlier, needing to be retired on lap 2.  In #200, Nino Todaro (partnering with Russo) left the circuit on lap 7, damaging the sump with terminal consequences.  The fourth car, #192, driven by Galli and Ignazio Giunti, did keep going to the finish, but was unclassified.  To some extent that car’s lack of pace was due to excessive heat affecting the ignition system – another problem that had been encountered earlier in the year – at Sebring, for instance – and indicating that further modifications to the air intakes needed to be developed.

Fig.9. 33/2 of de Adamich/Rolland refuelling on the Targa Florio.
Chiti is seen on the far left. Courtesy Schlegelmilch.com

Next up was the 1000 Kms of Nurburgring – another track which would present a severe challenge to the robustness of the 33’s suspension.  The lead chassis, of de Adamich/Galli, failed the challenge, its suspension breaking on lap 18, though it had run as high as 9th, (against heavy Porsche competition, especially in the form of the 910 model).  This was a compounding of disappointment for this pairing, its intended race chassis having been damaged beyond immediate repair in a practice session accident.  However, some compensation was provided by Chiti’s decision to let de Adamich and Galli take over the car struggling down the order in the hands of Bussinello/Zeccoli, a move vindicated when it was seen to have reached 5th place at the finish.  But no exuberant celebrations were appropriate in the Autodelta pit, a DNF being recorded for the 33 of Russo/Baghetti, (gearbox).

Fig.10. Autodelta team in the pits at the Nurburgring 1000 Kms.
Courtesy Accursio Cassarino/Primotipo.com

Although there was clearly a need to find solutions for the suspension fragility and distributor overheating issues, Chiti diverted some focus to the 33’s aerodynamics.  It was determined that the high ‘periscopica’ intake was causing problems, disturbing the flow of air to and over the rear deck, whilst at the same time helping to create lift at the front axle.  As a result, at the cars’ next major event appearance – at Mugello - they sported a new longtail which promised not only improved stability but also a higher top speed potential.  This race itself however did not see these objectives proven – all three cars entered retired after just 3 laps (of 8).


Fig.11. New tail for the 33/2 at Mugello

No 33s were seen again in 1967 at the remaining World Championship meetings, though a one-two was scored at the non-championship race at Vallelunga in mid-October.  Autodelta’s priority was to make improvements, with the emphasis on ensuring better reliability.  In their maiden season the cars had shown many good attributes and were certainly able to be fast enough at all the various circuit types.  The suspension failures in particular however had been far too severe and frequent, and had caused several retirements.  Pressing though the need was to resolve such shortcomings, Autodelta was at the same time required to provide time and resources to the development and production of the Stradale version.

Fig.12 Early 33 Stradale. Courtesy Centro Documentazione Alfa Romeo, Arese

Tuesday, March 1, 2022

Alfa Romeo TZ1

The Alfa Romeo Giulietta SZ and TZ models are well documented in Marcello Minerbi’s 1985 study, published by La Mille Miglia Editrice.  In the book’s foreword, Giuseppe Busso outlined the somewhat tortured gestation of the TZ, from initial concept in 1955, through the ‘exploratory,’ but flawed, Abarth collaboration known as the 750 Competizione/Sport, on to the 1961 spider prototype. 

Courtesy Alfa Romeo Automobilismo Storico

Despite the disappointment of the 750, Alfa Romeo design chief, Orazio Satta Puliga (Satta) and Busso determined that Alfa Romeo should create a lightweight, (tubular spaceframe chassis), sporting GT, with serious racing potential.  Power would come from the four cylinder engine that was such a distinctive feature of the Giulietta saloons and coupes with which Satta had achieved much commercial and reputational success for the Marque.  The model and its engine had enabled Alfa Romeo to gain a foothold in the mass market.  Necessary as this was, both Busso and Satta remained true to Alfa’s romantic sport/racing heritage, the latter saying:

Alfa Romeo is not merely a make of automobile, it is truly something more than a conventionally built car. There are many automotive makes, among which Alfa Romeo stands apart. It is a kind of affliction, an enthusiasm for a means of transport. What it resists is definition. Its’ elements are like those of the human spirit which cannot be explained in logical terms. They are sensations, passions, things that have much more to do with a man’s heart than with his brain.

So, in 1960, Busso’s team built a prototype chassis, which, on completion, was shipped to Zagato.  (Minerbi’s text is ambiguous, suggesting that there were two examples involved).  The body fabricated by the carrozziere was a spider with removable targa-type hardtop.  Progress was not especially rapid and it was not until the autumn that testing was begun.  On track, at Monza, the car’s aerodynamics were soon found to be flawed.  This consideration, coupled with handling issues – mainly related to the new (independent) rear suspension, saw the car turning disappointing lap times – unable to match those then being achieved by the established, but lower engine capacity (1300) Giulietta Sprint Zagato.  I took nearly twelve months for a full solution to be found in regard to the rear suspension, but the drag problem was sooner resolved by the adoption of a fully closed, streamlined roof – a TZ now looked like a TZ!  However, further experimentation with points of detail, such as the nose length/profile, delayed the emergence of the definitive TZ1 form until March 1963, after presentation at the Turin Motor Show in the previous October.  Designated as tipo 105.11, series production was organised on a dispersed basis: chassis by SAI Ambrosini, a now defunct aircraft constructor, then seeking to diversify; body by Zagato; engine upgrading and suspension build was entrusted to Auto Delta, the business set-up by Carlo Chiti and Lodovico Chizzola after their departure from Ferrari following the infamous Night of the Long Lives saga of October 1961.  Subsequently restyled as Autodelta SpA and integrated with Alfa Romeo SpA, Chiti’s enterprise also took responsibility for further development of the car together with its racing participation and evolution.  In this role, Autodelta can be seen as a precursor to operations such as Porsche’s Weissach facility and BMW’s M Division.  And an excellent team it was too, with many touring car (especially with the Giulia GTA/GTAm) and prototype sports car (Alfa 33) championship successes.

An account of the ‘birth’ and initial problems of the TZ1 appeared in the March 1992 issue of Autocapital magazine – it can be read here.


The number of TZ1s built from 1963-65 has been variously reported, with most estimates being close to the figure of 100, as was required for FIA homologation purposes.  Based on the register included in Minerbi’s book, and taking account of some additional insight by Luigi Fusi, (lifetime employee at Alfa Romeo and the company’s archive curator), the correct number is 109.  (The aspect which gives rise to most doubts is the period during which the TZ2 model emerged, with chassis numbers previously thought TZ1-related now attributed to TZ2s, and a few TZ1s physically converted to TZ2 specification.)

Copyright © - Collector Studio

There is particular uncertainty about the very first production chassis number, #750001 – although Minerbi records it as ‘Restored. Showroom car.  Present owner: M. Hayashi, Japan,’ it is elsewhere stated that it was destroyed during the production run, and, alternatively, assigned to a car not built until 1965.  However, it is not unexpected for there to be a measure of vagueness and conflicting reports about such specialised cars built now so long ago.  Mostly, the first dozen cars are described as race versions, initially owned/run by Alfa Romeo itself and/or factory-supported teams including Milan-based Scuderia St. Ambroeus.  Both #750003 and #750006 were prepared for and run in 1964 high profile events such as the Le Mans 24 Hours, the Targa Florio and the Nurburgring 1000 kms.  At Le Mans, several drivers were involved, including, Roberto Bussinello, Jean Rolland, Fernand Masoero, Giampiero Biscaldi, Giancarlo Sala and Bruno Bonini.  #006 finished in 15th place.  Even better, #011 was 13th and winner of the GT1.6 class, driven by Bussinello and Bruno Deserti.  At the Nurburgring, Scuderia St. Ambroeus again ran three TZ1s, and although one suffered engine failure, #028 was the GT1.6 class winner, finishing 13th overall, with #011 next up in 14th.  The team was also successful at the Targa Florio, #006 and #031 coming in 3rd and 4th, 1st and 2nd in class.  From this selection of results it will be seen that the TZ1 was immediately a highly competitive race car at major events.  Indeed, it had achieved its first class win – with Lorenzo Bandini at the wheel - before the close of 1963 at the (admittedly less prestigious) Coppa F I S A (Monza), with examples driven by, Bussinello, Giancarlo Baghetti and Consalvo Sanesi, finishing in overall 3rd, 4th, and 5th.


In 1965 the TZ2 entered competition and took the class honours in the Monza 1000 kms event.  However, TZ1s continued to achieve consistent success in the GT1.6 class at several significant meetings – at that Monza race, for example, taking 2nd to 5th places in class.  Lucien Bianchi and Jean Rolland drove a TZ1 to 7th overall and 1st in class at the Targa Florio, with 2nd to 5th places also claimed by the model.  In the Mugello round of the World Sportscar Championship, Carlo Zuccoli and Guido Rava took the GT1.6 class victory.  At Enna, Guido Rava won the GT1.6 class in the Coppa Citta.  There were Hillclimb class victories at Stallavena, Bologna Raticosa, Coppa della Sila, Bolzano-Mendola and Desana-Sestrieres.  Beyond Italy, the TZ1 was also racking up class victories in Germany – at the Avus DARM meeting, (Jochen Neerpasch), in England – at Donnington, (Boley Pittard), and was being campaigned in SCCA events in the U.S.

#108. Class winner, 1965 Targa Florio   ©MotorsportImages



The results of the following year’s Targa Florio were salutary – an Autodelta TZ2 managed 4th overall and the class victory, (with team cars also 2nd and 3rd in class,) whilst TZ1s were no higher overall than 24th and 4th in class.  For the 1966 Le Mans 24 Hours, 2 cars were entered, but, as was the case with several TZ2s, they did not run.  Broadly, the season was a disappointing one for the TZ1 – it was not matching the pace of the TZ2 or its direct competitors such as the MGB and the Lotus Elan.  But as the TZ1’s achievements diminished, the TZ2 scored good results and, subsequently, the Giulia GTA became Autodelta’s winning machine through the latter half of the decade.

Minerbi’s register suggests that 9 cars were constructed as TZ2s, the final chassis number being #750117, built in 1967.  The model had been launched at the Geneva Show in March 1965.  Significant changes from the TZ1 and which were instrumental in how quickly and comprehensively the TZ2 displaced the superseded model’s race competitiveness, were the body’s fibreglass construction, general lowering of engine/suspension/body and adoption as standard of the Conrero-built 165 bhp twin spark, dry sump version of the 1.6, 4 cylinder engine.  The body materials revision had been presaged by the use of fibreglass in the manufacture of the final three TZ1s, (#107-8 and #110).  These bodies were made by Balzaretti Modigliani SpA.  The kerb weights were: 658 kgs, TZ1; 630 kgs TZ2.  Improved aerodynamics resulting from the lower body form were further enhanced by a switch from 15” to 13” (light alloy Campagnolo) wheels.

The significance of the TZ1 stands above and beyond its own performance and competition results.  At one level, it provided the substance for Autodelta’s consolidation/development and accumulation of experience in preparing cars for, and running them on, the track.  Perhaps even more importantly, it served as the basis for the development TZ2 model, which itself would inform the creation of both the legendary touring car successor, the Giulia GTA, and the sports prototype 33, which would, in 1975, enable Alfa Romeo to reclaim the accolade of ‘world champions’ for the first time since 1951.

An account of the 'birth' and initial problems of the TZ1 appeared in the March 1992 issue of Autocapital magazine - it can be read here.