Showing posts with label Monza. Show all posts
Showing posts with label Monza. Show all posts

Wednesday, April 1, 2026

One Last Fabulous Zagato Abarth - the 750 Record Monza Coupe

Courtesy Bring a Trailer

Carlo Abarth had good reason to have a particular affection for the two words, ‘record’ and ‘Monza.’  As related in the Do Look Back post, Abarth 850 TC and 1000 Berlina - Sixties Supremacy, in ’56 he instituted a World Records programme run at the Monza circuit: Two years later an Abarth 500 achieved a record by covering 18,186 km at an average speed over 7 days of 108.5 kph.  Fiat was impressed!  So impressed that Carlo was able to gain agreement from Fiat that it would make a payment to Abarth for every motor sport victory recorded by a Fiat-based Abarth product.  This arrangement proved to be extremely helpful over many years, primarily in supporting the development of new products and race activity at Corso Marche.  So, in fact, there were over 7,000 ‘reasons’ why the name ‘Record Monza’ should be chosen for the new version of the Fiat Abarth 750 GT Zagato launched in Paris in October ’58 – those ‘reasons’ being the number of win bonus payments eventually made by Fiat through to ’71. 

The 750 GT Zagato had emerged in April ’56.  Performance was reasonable for the era considering the engine’s small displacement, the combination of 47 bhp and a kerb weight of 535 Kg enabling a 0-60 mph time of around 15 seconds and a top speed of about 93 mph.  However, given the Abarth marque’s inherent sporting aspirations, there was no hesitation in work beginning on a faster version.  This was founded on the availability for ‘58 of the Tipo 222 (696 cc) and Tipo 221 (747 cc) engines which incorporated the new twin cam (Bialbero) head designed by Gioachino Colombo.  Both were equipped with twin Weber 36 DCL 4 carburettors.  The 221 engine was rated at 57 bhp, allowing the 750 Record Monza to achieve a 0-60 mph time of 11.4 seconds and a top speed of 109 mph.  Priced at Lit 2,075,000, the model symbolised Abarth’s serious intent in regard to top flight sportscar racing, albeit that it was the succeeding 1000 Bialbero that eventually racked up the victories.  The 1000 model was unveiled in January ’60 with the designation, Fiat Abarth 1000 Bialbero Coupe, featuring the Tipo 229, 982 cc engine and with bodywork devised by Mario Colucci without input from Zagato, (though with several aspects, the single intake engine deck lid for instance, carried over from the Record Monza).  Confusingly, the Automobile Club d’Italia Homologation form for the new 1000 Coupe has the value ‘Coupe Record Monza’ in the field Tipo di Carrozzeria.  Regarding the homologation, Luciano Greggio asserted that following the Record Monza’s launch, ‘a semi-production run of 100 cars went ahead immediately to obtain homologation in the Grand Touring category.’  Though this could be a confusion with the homologation of the 1000 Coupe in March ’61, (whereas the FIA archive for ‘59 does not contain such a document for the 750 Record Monza), the 750 Record Monza began, in Spring ’59, to appear in the list of Abarth race/class victories compiled for administration of the Fiat bonus payments.  The model’s victory count for the year reached 53.  There were 51 in ’60, but by ’61, the 1000 Bialbero had taken over, with 55 wins during the course of the year.  Indeed, by late ’61 the 750 Record Monza had been replaced in effect by a ‘family’ of Colucci’s coupes comprised of the Monomille (single cam), 700 Bialbero and 1000 Bialbero, with bodies made successively by Corna, (immediately following the break with Zagato), Beccaris and, finally, Sibona & Basano.

Stand out 750 GT Record Monza first placings were in ’59: Six Hours, Vallelunga, (Prinoth); Targa Florio, (Prinoth/Carini); Mille Miglia, (Prinoth/Pitscheider); Eight Hours, Lime Rock, (Penske/Callahan); Coupes de Paris, Montlhéry, (Fabi).  In ’60: Six Hours, Hockenheim, (Seidel/Poltronieri); GT Grand Prix, Monza, (Seidel); 500 Kms, Nurburgring, (Castellina/Vinatier); Preis von Tirol, (Fabi); 1000 Kms de Paris (Consten/Condriller).

Surveying extant 750 Record Monzas offered for sale in recent times, several may be considered ‘early,’ indicated as having been built in ’59.  Two have been described as ’57-made.  As seen below, #441205 is certainly a ‘low’ chassis number – every other one I’ve seen is in the range #500000 to #860214.  It is claimed to be ‘pre-production’ and possibly prepared originally as a works race car.  But the date is surely unfeasible – the year of first presentation of the Record Monza being ’58, and the public debut in Paris ‘late,’ (in October).  This car has two features that are characteristic for ’59-made examples, distinguishing them from ’60-manufactured cars – absence of indicator repeater lamps on the front wings and no centrally-located intake aperture in the front valance.  As usually found, the chrome engine deck lid badge script incorporates ‘Derivazione’ in its abbreviated form, ’deriva’ – ‘fiat deriva ABARTH 750.’  The car was offered in February 2025 in RM Sotheby’s sale in Miami and was sold for $78,400.

#441205  Courtesy Classicdriver.com

#534203 is described without any equivocation as being of ’59 production.  Externally it differs from #441205 in having black, rather than bright metal frames for the two small rectangular intake apertures low in the front valance panel.  Also at variance is the engine deck lid badge, which reads, ‘fiat derivazione ABARTH 750.’  In addition, there appears to have been an aftermarket modification to the rear lamp clusters.  As on #441205, these are mounted with vertical orientation in standard specification, but are differently shaped, fitted to the engine decklid rather than the rear of the wings and are horizontally orientated on #534203.

#534203  Courtesy CarsandClassic.com

Bonhams, in handling the sale at Goodwood in July ‘08 of #541508, described it as having been made in ’57.  As Lot 595, the car’s auction description notes do not provide any information that would be a basis for attributing this date and I would be confident that this is in fact a ’59-built example.  This car provides evidence that the front wing indicator repeater lamps, (not fitted on the two cars shown above), were introduced early in the production run, probably around June/July, ’59. This car is fitted with  Campagnolo Abarth alloy wheels, (probably recent recreations given their apparently ‘unworn’ condition).

#541508  Courtesy Bonham's

Another ’59-built Record Monza is #546440.  It incorporates a few unusual features: 1) Currently fitted with an ex-Fiat 850 Berlina 903 cc race engine; 2) Tubular bumpers; 3) Single, Raydyot style front wing-mounted external mirror; 4) Plain, full size bright metal wheel trims.  Also of note is the absence of front indicator repeater lamps.  Offered for sale in 2025 for £64,950. 

#546440  Courtesy CarandClassic.com

The unrestored #550070 was sold on Bring a Trailer in 2025 for $30,000.  While the new owner’s first concern would surely be attention to the bodywork/chassis, this car will be in need of a replacement, original specification Abarth Tipo 221 engine.  The motor then currently fitted is described in the BaT listing:  The non-running Tipo 100.000 inline-four is believed to have been sourced from a Fiat 600 and installed under previous ownership. It is fitted with an Abarth intake manifold and air cleaner along with a single Weber downdraft carburettor.  

Among points of note with the bodywork is the absence of Zagato ‘Z’ front wing badges, engine deck lid badge, front bumperettes and centre grille/shield, missing rear side ‘glasses’ and flared extensions to the rear wheel arches.

#550070  Courtesy Antczak Motors

In late ’58 Carlo Abarth agreed to grant distribution rights in the U.S. East Coast region to the Roosevelt Automobile Company.  This enterprise was the creation of Franklin Roosevelt Jr, son of the former American president.  There was mutual agreement that participation in American motorsport would be an essential aspect of the marketing strategy.  Thus, there was immediate implementation of a plan in which cars would be race-prepared at the factory and shipped to New York, with ongoing race entry and maintenance/repair carried out and funded by Team Roosevelt.  Initially, this involved the supply of four Record Monzas to run in the 12 Hours of Sebring in March ’59.  The outcome was highly successful, the cars finishing 1-2-3-4 in the 750 GT class.  One of them was #550486.  It was sold in recent times – 2014 – by Bonhams for $203,500.  According to the auction lot description notes, this is the Record Monza that carried race number 62 and was driven by Lanzo Cussini and Remo Cattini to 2nd place in class.  Restoration was apparently started in the ‘90s according to Bonhams and by late in the decade it was being raced at Lime Rock in VSCCA historic events.

#550486  Courtesy Bonhams

14th April ’59 was apparently the date on which #555575 was delivered to its first owner in Palermo, capital of Sicily.  Apparently never raced or owned/operated outside Italy, the car was sold in 2019 by Girardo for €115,000.  The front end is notable, being non-standard in terms of an absence of the usual central ‘grille,’ scorpion crest shield and whiskers combination, and of brake cooling duct intake apertures below the indicator lamps.  At the rear, a crest shield badge has been mounted centrally on the engine deck lid above the ‘fiat ABARTH 750’ chrome script badge.  Distinctive on this car are the wheels.  These were made by Ruote Amadori.  Founded in 1950, Amadori was one of the first Italian makers of cast alloy wheels.  The company’s design was chosen by Zagato for fitting so some of the Giuletta Sprint Zagatos built for Alfa Romeo.  The same type was original equipment for the OSCA 1600 GT Zagato – see here.  Also of interest are the seats.  The standard type featured rectangular transverse cut-outs towards the top of the backrest and near to the leading edge of the squab.  In #555575 they have the backrest cut-out, but the squab does not – while it has two buttons in a similar position.  This would appear to identify these as being the lightweight, tubular frame type fitted as original equipment to the Giulietta Sprint Zagatos, as seen below.

#555575  - note Amadori wheels  Courtesy Girardo


Left: Seats in #555575  Courtesy Girardo;  right, as in Alfa Romeo Giulietta SZ, #00008  Courtesy ComtedeFlensburg (BaT)


An example of a Record Monza delivered with racing upgrades – including oversize drum brakes, Zagato racing seats and  Borrani 12-inch bimetal, 14-hole road wheels - from the factory is #556150.  The first owner was Emil Knecht of Zollikon, Zurich, a motorsport competitor with Squadra Tartaruga – a team of Swiss and British drivers, including in its number Rico Steinemann, who became Porsche’s racing and PR chief in ’69.  Later, he was appointed as the editor of the Porsche magazine, Christophorus.  The car was restored circa 2008 and offered for sale in ’13 with an asking price of £150,000.  It is seen racing in-period in the B&W photographs below.

#556150  Courtesy Bring a Trailer

#556150  Courtesy Bring a Trailer

A Facebook post from December ’24 presents details and photographs of #560697, which ‘FIAT ABARTH’ says was manufactured on March 27, 1959.  An extensive restoration process is outlined, with emphasis of a focus on returning the car, as far as possible, to original specification.  This includes features the post states as being exclusive to the Record Monza model: ‘The Jaeger rev counter with a painted redline zone around 7000 rpm, the starter lever with the choke lever removed, etc. are features that are only found on the 750 Bialbero . . .’  These items are seen below, as is the engine bay, an especially attractive feature of the car.  As with #556150, Borrani bimetal wheels are fitted.

#560697  Courtesy Corgys

#560697  Courtesy Corgys

Another Record Monza for which a date of manufacture is asserted is #577535 – 20th April ’59.

#577535  Courtesy Bonhams

Although positively identifying vehicle built in its era is often a complex and difficult matter, a Record Monza tends not to be since it bears multiple ‘tags,’ reflecting the origin of its chassis structure, the Abarth marque itself and the source of the body.  Thus, a car will have a Fiat factory stamping into the chassis sheet metal, an Abarth-fitted plate with stampings for, 1) Tipo, 2) No. Telaio (chassis), and 3) No. Motore (engine) and a body number, assigned by Zagato.  Regarding the later, this will usually be found in various places, including on the underside of internal trim, door apertures and on the windscreen frame under the dashboard.  For #577535, the body number is quoted as being Z47.

#577535 Identifications  Courtesy ClassicDriver.com

As indicated in the third paragraph of this survey, initial racing successes for the Record Monza in ’59 were attributable to the exploits of driver, Ernesto Prinoth.  According to Bonhams’s notes for the recent sale of #577535, Prinoth was its first owner, taking delivery in April ‘59.  It had apparently previously been an Abarth works race car, featuring the 14-hole Borrani alloy wheels and front disc brakes.  It was also suggested, although not confirmed, that it is one of the cars that participated in the Mille Miglia, Targa Florio, and Coppa Sant Ambrosius in ‘59.  The Bonhams sale, in Belgium, October ’19, saw a price of €95,000 realised.

#614316 is said to have been manufactured in July ’59.  In September ’25 it was referenced on the authoritative Fiat Abarth 750GT Zagato Forum.  The post stated that ‘The car currently has an Abarth 850S motor (214) and the original 750 motor is currently being rebuilt to go in the car next year.’

#614316  Courtesy Michael B/Fiat Abarth 750 GT Zagato Forum

Prior to joining Abarth in ’59, Mario Poltronieri had been one of the drivers participating in the legendry world record breaking at Monza.  Subsequently employed by Carlo Abarth, he was mainly a test driver, but he was also involved in the workshop with engine tuning and in the office with Public/Press Relations.  In the days before the volume of cars produced at the ‘old’ Abarth Via Trecate factory premises and subsequently at the new base at nearby 38 Corso Marche, when the staff headcount was small, various tasks were delegated to Poltronieri on an ad-hoc basis – he journeyed to England for example to evaluate Dunlop’s disc brakes and this led to their adoption by Abarth.  Having played a part in the records breaking, it was especially appropriate that Poltronieri should have become the owner of the Record Monza, #711565, once he was  member of staff.  The deal may have come about through his involvement with the car in an experimental/development role since it has been said that the car was originally built as a spider and rebodied as a coupe in ’62. 

#711565  Courtesy AutomotiveMasterpieces.com

In October ’18, Record Monza #780410 was offered in a sale at Padua by Bonhams with an estimate of €120,000 - €160,000.  The auction lot notes included, (it) ‘was comprehensively restored by renowned Italian coachbuilders Faralli of Pisa, Tuscany some 10 years ago, while the overhaul of the mechanicals was entrusted to the Abarth specialist Fallorno of Empoli, again in Tuscany.’  Despite its excellent condition and Abarth Classiche certified status, the car remained unsold.

#780410  Courtesy Bonhams

#780410  Courtesy Bonhams

Probably conducive with its chassis number, #860214 was described at Sotheby’s ’16 London sale as a ’61 car.  It was offered with an estimate of £75,000 - £90,000, but not sold.  Any sales resistance may have stemmed from it being equipped with a replacement, single cam engine.  On the other hand, it is a car with racing history, having most notably been driven by the well known Umberto Maglioli, three times winner of the Targa Florio.

Although the Sotheby’s description incudes an indication that it had, ‘the benefit of Abarth Classiche certification,‘ a non standard engine deck lid (with 8 louvres in the lower area) and absence of a script badge on the panel are evident.  The front valance panel incorporates a central, elliptical intake aperture.  This feature has been seen on no other examples in this survey of extant Record Monzas, except for a believed-’60 made car for which the chassis number is unknown.  Also noted are non-standard B pillar badges, (‘lightning' version fitted in place of the usual ‘flag, ‘RECORD MONZA’, scorpion crest items).  Sliding race inserts are installed in both side windows.  Wheels are Campagnolo Abarth style alloys.

#860214  Courtesy RM Sotheby's

The 850 Record Monza was introduced in June ’59, outdoing the 747 cc model in performance terms with 70 bhp and a top speed of 118 mph.  But the key to Abarth’s ongoing GT racing success was the new 982 cc Fiat Abarth 1000 Bialbero Coupe, (ES 01).  Announced in January ’60, the new car’s Tipo 229 engine gave 91 bhp and was capable of 121 mph.  Initially, it was Zagato-bodied and had the appearance of the 850 Record Monza, but not ‘Z’ badged.  With the establishment of Carrozzeria Abarth, the building of restyled bodies was  re-assigned to Beccaris.  Thus, the Record Monza designation lapsed.  A more detailed account of the transition is found in the Do Look Back post, Abarth's 912 - the Mono Mille GT 


Tuesday, October 14, 2025

Abarth 850 TC and 1000 Berlina - Sixties Supremacy

The Nuova 500 was launched by Fiat in mid-’57.  That Abarth should want to produce its own version was not surprising.  Whatever else might be said about the 500, its 13 bhp hardly made for good drivability characteristics.  Abarth’s modifications, upping power near twofold to 20 bhp, transformed the 500’s performance, which, Fiat-badged, initially struggled in terms of customer acceptance.  Unfortunately, the Tipo 105 Abarth 500 also failed to sell in the numbers planned, primarily because that increase in horsepower had come at the expense of a significantly higher price tag – 18% greater than that attached to the Fiat.  Carlo Abarth was quick to respond to the situation, ordering that a bespoke, 26 bhp version be made and adopted into his Monza circuit-based World Records programme instituted in ’56.  In February ’58, the car achieved a record by covering 18,186 km at an average speed over 7 days of 108.5 kph.  Fiat was impressed!  So impressed that Carlo was able to gain agreement from Fiat that it would make a payment to Abarth for every motor sport victory recorded by a Fiat-based Abarth product.  This arrangement proved to be extremely helpful over many years, primarily in supporting the development of new products and race activity at Corso Marche.  It is important to understand that in making the offer, Fiat’s Commercial Director, Lorenzo Brinatti, was firm in that only a race win would trigger each payment - any other placing was not to be recognised  This condition had effects which were not all totally desirable, the most significant being that Abarth’s view of what sort or races and classes it should concentrate on was perhaps overly slanted towards those in which its car could be considered favourite for the victory.

Three years on from the Monza record achievement and related ‘win bonus’ establishment, Abarth presented the first of a line of 850/1000 models which would be the most adept at garnering the best possible level of income from the agreement.  These models were based on the Fiat 600, which had begun production in ’55.  By the time of the Abarth 850’s unveiling, a million 600s had been made.  So, a success, certainly, but also a product that was due an updating.  This Fiat delivered with an increased displacement (767 cc) engine, designated 600 D – good for 29 bhp.  Abarth’s re-interpretation of the design included an uprating of engine output to 52 bhp in a model named 850 TC (Turismo Competizione) reflecting an increased cubic capacity of 847 cc.  Complementary specification changes also included Girling brake discs for the front axle and an additional radiator located midships under the floor.  An example of a 850 TC made in the first year of production is shown below.  #1022733, was raced in period by Gianpiero Raffa.  As offered in recent times by Woow Motors (Switzerland) it was in race trim with partial roll-cage and running on Cromodora alloy wheels.

850 TC, #1022733 Courtesy Woow Motors/Dyler

The 850 TC was priced at Lit. 850,000 and clearly marketed as a model to win incremental sales volume.  Equally, it was specified with race wins in mind and in its first year on track/hill courses it began to deliver in August at the Cesana-Sestriere hillclimb, and nine high profile event victories had been gained before the season’s end.  September’s 500 Km at the Nurburgring was especially rewarding, with Ernst Furtmayr winning the 850 class.  Moreover, 850 TCs finished 1-2-3 in class.  Thus the advertising department at Corso Marche was soon busy with celebratory ads in the specialist press publications, example below:


To capitalise on the success seen at the ‘Ring, Carlo called for a special version of the 850 TC to be developed and this was done at some speed, the launch of the Abarth 850 TC Nurburgring occurring in November ’61.  (Curiously, this model, with designation, Project 64, Sigla 114, is shown in factory records as having been introduced in January ’61, 9 months prior to the launch of the 850 TC itself!)  Whether or not the January event was organised with the assistance of a clairvoyant, the car added to the buoyancy of sales as a result of enthusiastic customer reception of its features including a boost in power to 55 bhp enabled by a modified camshaft, a five speed gearbox, and a price tag only Lit. 40,000 bigger than that of the 850 TC.


An early-built 850 TC Nurburgring, #1540906, is shown below:

#1540906 Courtesy Bonhams Cars

There was variation in the badging of the Nurburgring model.  On some extant examples, the lower right corner of the engine decklid carries a generic 850 TC chrome script – left, below.  However, on #1458387/3320, ‘ABARTH’ and ‘nurburgring’ are added – right, below:


Of course the engine deck lid badges were usually not readily seen because of the prevalent practice, (increasingly so as of ’62), of running with the lid propped open. This – in contemporary parlance – 'hack' was seen as a silver bullet, the aerodynamic ramifications being in terms of downforce (improving rear end stability) and enabling a higher top speed – some said as much as an additional 5 mph, all at the same time as helping preclude engine overheating and heat sink in the bay. 

The ‘Nurburgring’ was a success both on track and in dealer showrooms.  This was helped by very favourable advocacy in the press, Auto-Italiana for instance having this to say in ’63:  ‘The performance of this inspired Abarth is certainly superior to that of a car of almost double its cubic capacity.  We would say that its engine despite the power that permits excellent performance, is elastic to the point that there is good acceleration even at a medium speed of around 3,000 rpm.  This is another positive quality of the vehicle, which is really a sports car but still relatively economical.’  But Abarth was not inclined to rest on its laurels – the 850/1000 TC range was the subject of gradual improvement/performance uprating over several years.  Progressive homologation update appendices were effected with a number of supplementary items, registered especially for ‘67/’68.  The 1000 TC Berlina was Group 1 homologated in January ’63.  The ’67 updates saw the approval applied for the Group 2 Special Touring class.
 
Some confusion can arise because of the moniker ‘Corsa’ applied to some ‘Nurburgring’ 850 TCs.  The is because Abarth also released in ‘61 a model with the ‘Corsa’ designation, this being the first of a line powered by the bigger capacity (982 cc) Tipo 210 engine.  The 1000 TC Berlina Corsa (#114D) was rated at 60 bhp.  The Tipo 210, was at the same time utilised in the Monomille Scorpione GT coupe.  Other important changes were driveshafts with universal joints and the fitting of disc brakes to the rear as well as the front axle.  Shown below is a ’63 example, #1428998.  This 1000 TC Berlina Corsa was sold in recent times for €24,900 by Race Cars Direct:

#1428998 Courtesy Race Cars Direct

In early ’64, the Series 2 1000 TC Berlina Corsa’s power was up to 76 bhp.  Of significance, the underfloor radiator was relocated to the nose and housed within a newly designed protective nacelle with the appearance of a very heavy duty bumper, conferring a distinctive/aggressive ‘look’ to the car’s front end. 

The ’64-effective additional homologation features defining a Corsa version vis-à-vis the Berlina, included engine uprating, (12.2:1 compression ratio and 36 mm Weber), to a maximum of 80 bhp, 5 speed gearbox, discs all round, revised suspension and larger front radiator.  By ’64, the Berlina Corsa’s engine output was given as 76 bhp and numerous other detail, race-purpose improvements led to the designation, ‘2nd Series.’  This was followed in February ’65 by an 80 bhp ‘3rd Series.’  In particular, this featured a revised coil-over front suspension, distancing the Abarth set-up further from that of the Fiat 600 with its transverse leaf spring.  Performance was enhanced by the adoption of the 5 speed Tipo 121 gearbox.  The radiator capacity was also increased, enabling deletion of the engine bay fan, (the car still retaining a rear radiator in addition to the nose mounted item).  During the ’65 season, some 1000 TCs were raced with the Radiale head version of the 200 series engine.  The 4th Series of the Berlina Corsa appeared in September ’66, powered by the 210-C engine delivering 85 bhp thanks to a 13:1 compression ratio and a higher maximum rpm of 7,600.  Both the coolant radiator and the oil cooler were of increased capacity  The frontal radiator housing was restyled to enhance aerodynamics and the car’s weight was trimmed a little – down to 583 Kg.  As a result, top speed was reported to be up to 121 mph.
 
Proof of the 1000 TC’s prowess came in the years ’65, ’66 and ’67 when it was the Division 1 European Touring Car Challenge-winning car for Ed Swart, Giancarlo Baghetti and Willi Kauhsen, respectively.

66 European Touring Car Challenge champion, Giancarlo Baghetti, winning the Aspern round. Courtesy Erwin Jellnek

#1965262 Courtesy Classic & Collector Cars

The introduction of the 4th Series 1000 TC was concurrent with that of the 1000 TCR.  The ‘R’ signified the Radiale head and indicated a car with 92 bhp, available at an even higher engine speed of 7,900 rpm.

1000 TCR engine installation Courtesy Revs Institute

#2366678 is an early TCR, built in ’67.  In the first decade of the 21st century it underwent a full restoration and specification update in preparation for Historic Racing.

#2366678 Courtesy Anamera

In early production, the Radiale engine’s 92 bhp, enabled a 0-60 time of 7 seconds and a top speed of 122 mph.  The model was developed with a 2nd Series appearing in February ’68, a 3rd the following year and a fourth in January ’70.  The 2nd Series benefitted from an increase in engine output to 97 bhp, while the 3rd had 108 and the 4th, 112-115, (at 8,200 rpm).  The final iteration’s top speed was 124 mph.

There were new Appendix J regulations for the ’70 season and the 4th Series TCR was Group 2 compliant.  With near-complete freedom in regard to the cylinder head, the rules enabled a further increase in power since twin double choke Weber 45 DCOEs were allowed, as were another iteration of both the camshaft and manifold, together with a prominent exhaust system with long transverse final pipe section.  Rear windows and rear screen were re-specified in Plexiglass, while the front and rear wings/wheel arches were widened and a new fibreglass engine deck lid fitted.  (This latter item was subsequently ‘unhomologated’ on the grounds that it could become debris of a dangerous nature in the event of a rear impact).  After feedback from the works drivers, in which they complained about how the car was handling with its increased power output, the rear suspension was reconfigured, reverting to a tubular components/triangular format arrangement, not unlike Fiat’s original design for the 600.
 
The driver most associated with the era was Johann Abt.  He joined the Corso Marche factory team in ’67 and won 29 races.  The following year he was a winner at 17 events and was a contender in the German Hillclimb Championship.  After leaving in ’70, Abt continued to race the marque’s cars and is thought to have notched up over 300 victories in the course of his career.

Johann Abt winning at Salzburgring, ’70.  Courtesy ABT Motorsport

With various rule revisions, (most significantly, the 1st Division capacity limit in the European Touring Car Championship was increased from 1 litre to 1300 cc), and competitor strength changes, Abarth’s focus in ’71 shifted to the European Hillclimb Championship – once again, a successful campaign.  Otherwise, ’71 is remembered for the demise of the Abarth factory’s motorsport operation and the marque’s absorption into Fiat.  There was some bravado beforehand however - in February, Carlo, accompanied by Arturo Merzario, presented the SE020, SE021 and SE022 Sport Spider prototypes at the Torino Aero Club’s airfield just across the Corso Marche.  Then, where in previous years, comparative test sessions had been held at Vallelunga or Monza, these were conducted later that month at the Paul Ricard circuit, Le Castellet, France.  The emphasis on this occasion was on the Prototypes and larger engined cars.  Once the racing season got underway, Abarth fans might have thought that ’71 was going to be ‘business as usual,’ as March’s Monza round of the Italian Touring Car Championship saw class wins for Edoardo Gunnella in a 850 TC and for Gino Ravinale driving a 1000 Berlina.  In the mountains too, Abarth drivers Giuseppe D’Ippolito (850 TC) and Luigi Ferragina (1000 Berlina) were best in class in European and Italian Hillclimb events.  By the end of the season, Edoardo Gatti (850 TC) had taken the European Hillclimb Championship, 850 class, and Maurizio Campanini (1000 Berlina), the 1 litre class.  However, even as encouraging results were being recorded, Fiat informed Carlo that he would be deprived of the very thing that had facilitated so much motorsport success – the ‘per-win’ bonus payments were to be stopped.  On top of the many other commercial/financial problems with which Abarth had been struggling, this was a final straw.  At the same time, however, Fiat offered to buy the Abarth business lock, stock and barrel.  Carlo really had no option but to accept, and Fiat confirmed the agreement at the end of August, though it was not announced to the public until 15th October ’71.  Meanwhile, the racing department had been moved to the premises of Enzo Osella’s Osella Squadra Corse.  Osella would run the SE021 and develop the SE027 Prototype Spiders through to ’74. 

Eventually, as the 850/1000 TC’s development period had come to a close in ’70, the year before Fiat’s acquisition of the marque, the 850 had gone from a Lit. 850,00, 52 bhp car to one with many updated features and a 55 bhp-rated engine.  The 1000 TC began life with 60 bhp, while its ultimate successor, the TCR, had near double that, at 115 bhp.  Meanwhile, the price had reached, Lit.3,710,000.  Given the ‘per win’ bonus which Fiat had agreed to pay Abarth back in ’58, both the 850 TC and 1000 TC models contributed significantly to income over and above the sales revenues they generated, with no fewer than 2,357 race/class wins during the period ’61-’71, (1,236 by 850s and 1,121 by 1000s).
 
All these many decades after Abarth’s golden era, interest in the marque is strong and widespread.  Highly instrumental in the classic Abarth ‘scene’ is the Berni Motori business based south east of Milan at Maleo - http://www.bernimotori.com/.  Tony Berni – who has very kindly helped me in researching aspects of the cars on several occasions – summarises the history and allure of the 850/1000 TCs with this publication: http://www.bernimotori.com/press/Fiat%20Abarth%201000%20Berlina%20Corsa.pdf

Thursday, August 29, 2024

Abarth Doppia Bolla - I dettagli. Part 2

 

While a good part of the 750GT’s alure/enigmatic character is the tendency for body/trim variations to come and go – often on a far from systematic basis – ‘loose’ record keeping at Corso Marche has left us with real difficulty in their charting/dating.  So the survey of key external body areas/trim that follows is offered only on an indicative basis and cannot be considered definitive. 

I have frequently referred to the Image Archive within the Fiat Abarth 750GT Zagato Forum.  Many of the illustration captions (and thus the abbreviations)  below are as recorded in the Image Archive. Please let me know if you identify any possible image copyright issues.

Roof:  The following points stem from John de Boer’s Fiat-Abarth "double bubble" study (January 2018):

  • Cars built by Zagato before the formal agreement for the creation of the 750GT as an Abarth model, designated Zagato Serie 1, have a ‘smooth’ roof.  This includes the very first car, #001766, which was built by Zagato for Ovidio Capelli, a Milan dealer.  John also cites the following as thought to be smooth roof/Zagato Serie 1 examples: #091978 and #118619.
  • The first 'Double Bubble' designated as such in John's database is #145806, with date attribution of April '56
  • Reversion to a 'smooth' roof occurred in February '58 with the introduction of the Record Monza Model.  However, the cars not powered by the bialbero engine continued to feature the twin-hump roof line, but see note on the Sestrière model below
  • The Sestrière  model introduced in April '59 for the U.S. market featured a smooth roof line

The Abarth Buyer’s Guide by Pete Vack refers to a 3rd series of the 750GT, noting: ‘By late 1957, Abarth and Zagato had reached consensus on the definitive 750GT.  The Series III was built with variations for European and American market cars.  The classic 750GT Series III for the United States had much higher twin domes.’

#118619 (Courtesy John de Boer)

#163327 (Courtesy John de Boer/Renald E)

#757464 Sestrière  (Courtesy Petrolicious/Collector Car Network)


Engine Cover:  The twin bulge form engine cover, ‘extending’ the lines of the roof bubbles, is evident from earliest production. In addition to these two air intakes, there is another, horizontal, aperture just over half-way down the panel and located above the model script badge and vertical cover handle.  Along with the smooth roof, the Record Monza’s engine cover on the model’s introduction differed from that of the Double Bubble, a single large duct replacing the twin intakes.  Because of the bialbero engine, the Record Monza’s cover also incorporated a hump to accommodate the power unit’s higher profile.  As seen in the photograph of #757464, above, the Sestrière’s engine cover, though retaining the Double Bubble’s twin intake format, rendered these with a more boxy, less curvaceous profile.

#651662 (Courtesy Kidston)


#773518 Record Monza (Courtesy Bonhams)


#741833  Alternative script mounting. (Courtesy Switch Cars)

As mentioned above, a feature of ‘Corsa’ specification cars was said to be a ‘Mille Miglia Motore’ badge affixed to the dashboard.  Though this may well be a matter of personal customisation by the owners, examples have been seen of this badge being mounted on the engine cover of Double Bubbles and Record Monzas.

Mille Miglia Motore badge. (Courtesy WorthPoint)

#585940 MM badge on engine cover. (Courtesy John C. / Gooding & Co)

Windows, Glass, Plexiglass:  Double Bubble models featured 6 ‘glass’ areas: front windscreen, rear screen, door glass, rear quarter glass, between B and C posts.  Plexiglass was substituted for cars destined for competition use from the outset.  The substantial variation was confined to the Record Monza model, wherein a small triangular window was let into the area between the B and C posts, and under the outer edges of the rear screen.

#418163 (Courtesy Bonhams) 

#860214 Record Monza (Courtesy RM Sotheby's)


Front:  From the earliest chassis numbers, the front panel featured a grille and a horizontal bar, tapering to a point, either side, (sometimes referred to as ‘whiskers’), mounted a little above the leading edge, and slightly lower than the level of the headlamp fairing apertures.  Because of the curvature of/bulge in the front panel, the central grille is convex.  Contemporary replacements are available from Fiatplus.com. and supplied in either ‘thick or ‘thin’ form.  The grille is two part – outer ‘shield, ’ chrome meshed, with a smaller central rendition of the traditional Abarth marque, Scorpion badge.

#260452 (Courtesy Bring a Trailer)

‘Whiskers’ currently available from Fiatplus

However, again from early production, some cars wore only the central grille, with no whiskers, e.g. #162696.  Another instance, #239600, shows a further variation – no whiskers, but a pair of vertical bumper bars.  #417338 is illustrated while undergoing bodywork restoration – the 14 factory-drilled mounting holes are clearly evident, per side: accommodating the lower lamp surround trim, two, one above the other for the vertical bumper bars, two, horizontally aligned, to carry the whiskers, central hole for a number plate (?) and one for the upper quadrant of the central grille.

#162696 (Source Unknown)



#239600 (Courtesy Ame. G.)


#417338 (Courtesy John C.)

The latest chassis number I have found which carries the central grille and whiskers is #720384.  Later cars, e.g. #756808, fitted with the full width/wrap around bumper bar do not carry the whiskers.

#720384 (Courtesy T.M.)

#756808 Sestrière (Courtesy John de Boer/Aguttes)

#594111 (Courtesy Bring a Trailer)

Late cars have an additional ‘Fiat’ script badge mounted above the central shield-grille/Abarth crest.  According to the Abarth Buyer’s Guide by Pete Vack, this script was introduced in late ’57 on the ‘Series III’ American market cars.

#523733 (Courtesy Tim Scott/RM Auctions)

Below the headlamps, a small, aluminium cased circular/cone-profile indicator (usually with a clear lens) is mounted.  On the late versions the location is seen to be above the wraparound bumper.  Underneath this lamp, a small rectangular, sometimes chrome framed aperture provides for the intake of air to help cool the front brakes.  The earliest clear photograph I have found of this modification is of #462534.  Absence of this feature has been said to be an indication of the car being a Corsa version.

#462534 (Courtesy Artcurial) 

Headlamps: Circular, and mounted at the rear of a faired-in aperture, the 5.5” units were usually provided with a Plexiglass front cover from early production.  This remained the common configuration until late in the production run – last photographed - #720384.  Then, along with the full width/wrap around bumper, the lamps were located further forward on the leading face of the front wing, upright and chrome-rimmed, (#734541).  Cars built for immediate export to the U.S. featured 7” covered headlamps.

#720384 (Courtesy T.M.)

#734541 Sestrière (Courtesy John de Boer)

Side Badges: A constant feature from the beginning of production was the placement of a black Zagato Milano ‘Z’ badge on the front wings between the rear of the front wheelarch and the leading edge of the door.

The rear quarter panel badges – upper depicting a triangular checkered flag with ‘Gran Turismo 750’ script/block arrow with script referring to Italian national championships; lower is the Abarth crest - are not seen on cars as late as #441784 (July-‘58);  they are evident on #446004 (August-‘58).  The Record Monza lacked badging on the rear quarter panel, but had model and Abarth crest badges applied to the B post area between the door and rear side windows, as seen on #441205 mid-‘58).

Zagato Z badge (front wings) (Courtesy Bonhams)

#504396  Rear 1/4 badges locations (Courtesy Bring a Trailer) 

#441205 (Courtesy RM Sotheby's)

The Double Bubble rear 1/4 badges vary according to year of manufacture.  For ’58-made cars, the upper badge commemorates the Italian Championships of ’56 and ’57.  For ’59 and ‘60, the badge was amended to add the ’58 Championship victory.

’58 production upper badge (Source Unknown)

'59 production upper badge (Source Unknown)


Positioning of the upper and lower badges (Courtesy Simoncars)


Record Monza badge (Source Unknown)

Positioning of the upper and lower Record Monza badges (Source Unknown)


Rear: The profile of the rear face of the rear wings is ‘blunt’ (radiused) on early cars, e.g. #248883, below.  Note the simple, small taillight units.  The wing profile over its trailing edge was modified, (creating what was referred to by Greggio as ‘little tails’), and a larger, deeper (proud-standing) taillight unit introduced subsequently, e.g. #602924, below.  However, the Record Monza incorporated the ‘blunt’ rear profile, e.g. #577535.

#248883 (Courtesy Bonhams)

#602924 (Courtesy T.M.)

#577535 Record Monza (Courtesy Bonhams)

Rear light cluster: The earliest (mid-’56) chassis number I have for reference, #163327, features a three section lens, top to bottom, orange, red, red – still in use on #358847.  A narrow horizontal chrome bar separates the upper (orange) lens from the middle (red) one.  The top and bottom are (vertical) ellipse shaped, broader at the top, sharper at the bottom.  On #248883, (early-’57), a variation of this type has the lower red lens projected outwards and with a chrome ‘casing.’  Also evident on other ‘early’ cars, #244318, (early-mid-’57), for example, is an elongated oval with a central circular, darker section.  All these variants have a chrome surround.  #443582, (mid-’57), features an all red lens with central, horizontal chrome bar divider and this is commonly seen, as late as #757464, (
Sestrière, ’60), for instance.  First seen on #558321, (’59), is a type which is then common as far as example chassis #830648, (’60-’61).  The chrome surround of this has a sharp ellipse top and bottom.  A square red stop light lens projects from the centre and this is held by a chrome casing.  On #617839, (‘60-‘61), it is seen that the top ellipse is much blunter than the lower one.
Images courtesy of (left to right): Classic Driver; Ame/Renald E; Bonhams; Unknown; Beverley Hills Car Club; Dave G.


Rear Bumperettes/Bumper Bars.  The first basic distinction would be that a car delivered to a customer whose primary intention was to race it, would have no bumperettes at all.  On the early (mid-’56), chassis number, #163327, a pair of vertical bumper bars is fitted on the joint between the lower rear valance and the rear wing.  As with many other examples of rear ‘body furniture,’ it’s impossible to judge with certainty, but I’d suspect these are a later addition.  However, this configuration is also evident on the early chassis, #244318, (early-mid-‘57).  The earlier cars were sometimes fitted with a number plate surround in chrome which provided, in effect, two vertical bumperettes of smaller proportions.  This arrangement is seen on #222623, #239600 and #248883 (all early-’57) and #244318 (early-mid-’57).  It seems to have been a short-lived solution, being superseded in late ’57 by the installation of a pair of horizontal bumperettes, doubling as registration plate lamp bulb holders either side of the number plate mounting, to #418163 (’57).  This style/level of rear bumper provision then became a norm until the eventual cessation of production.  A late example is #749634, (mid-’60).  However, also often seen was a combination of the vertical bumper bars along with the horizonal pair.  An early example of this is #358847 (late-’57). 

Images courtesy of (left to right): John de Boer/Renald E; Artcurial; T.M.; Classic Driver


Rear bumpers.  Chrome-finish quarter bumpers, effectively protecting all four ‘corners’ of the car, appeared on Sestrière models manufactured in ’61 – example, #734541.  Note: Elsewhere it was documented: 02-’58 ES 01, Tipo221 750 Coupe Record Monza Zagato 57 bhp; Greggio says smooth roof, 3 pane rear window, horizontal wraparound bumpers.

#734541 (Courtesy John de Boer)

Chrome rear model script.  This is usually found mounted at a 30° angle across the centre of the engine cover, between the cover’s lock and the upper horizontal aperture.  The script itself commonly comprises the words, Fiat ABARTH 750.  An example is seen on #418043, (mid-’58).  Variations: Fiat/deriva ABARTH 750 (#651969); fiat derivazione /ABARTH 750 (#558327, and #446004, (mid-’58)).  The deriva/derivazione is a reference to the programme by which Abarth developed the 750GT as a derivation of the Fiat 600 model.  The 30° angle-mounted script continued until late ’59, e.g. #693930 (Sestrière).  However, a further variation, from late ’59 onwards - is the fiat ABARTH 750 script mounted centrally and horizontally – not at the 30° angle previously noted, e.g. #706590, also #694916 and #696265, (both late-’59) and #719212, (mid-’60).

Images courtesy of (left to right): Marks-Nagoya; Bonhams; RM Sotheby's/Hyman Ltd; W Dons/John de Boer


Images courtesy of (left to right): Sports Car Shop/Mike S; Bonhams

I suspect that this will forever be an ongoing work-in-progress.  By virtue of the type of vehicle this is, and the sort of enthusiasts that typically own examples, cars seen/photographed today may well display features which have been added/modified over the years, long after they left the factory – such customisation is especially commonly seen in regard to badging, trims and wheels.  And, as regards the details of any 750GT as it left Corso Marche, such is the accuracy/completeness/availability of the contemporaneously-recorded data concerning production of the cars, that there will be many aspects of their specifications which will remain uncertain/disputed.  I do not pretend to have access to any magic bullet processes or data sources which would resolve such issues.  All I have done here is to collect together and systematically organise existing information with what I hope is an appropriate level of discretion.  But, even so, I’m sure there will be readers with far greater first hand knowledge of the cars than I have who will perceive misunderstandings/anomalies in what I’ve written.  That being the case, I’m very keen to receive appropriate feedback so that the document can be refined and improved – so please don’t hold back!

Reference sources: 

(Greggio)          The Man, the Machines by Luciano Greggio 

(Secc)               Abarth, The Scorpion’s Tale 1949-1972 by Sergio Seccatore 

(JdB)                 John de Boer 

(AB)                  Tony Berni, Berni Motore 

(GM)                 Guy Moerenhout 

(DegRiz)            Abarth. All The Cars by Elvio Degamello and Arturo Rizzoli 

(GastSecc)         Abarth. Memories by Luca Gastaldi and Sergio Seccatore 

(Cos)                Abarth Guide by Alfred Cosentino 

(BoSt)               Abarth Racing Cars Collection, 1949-1974 by Stefan Bogner and                          Franz Steinbacher 

(Forum)             Fiat Abarth 750GT Zagato Forum 

(MBG)               Middle Barton Garage, Tony Castle-Miller 

(PV)                  Abarth Buyer’s Guide by Pete Vack